Re: [PSUBS-MAILIST] K-600 Reconditioning

[Jon Wallace <jonw@psubs.org>]

Paint, etc.

I'm at the point where I'm nearly ready for sandblasting and painting 
and need to consider options.  I read the "cheap or proper" paint thread 
from the archives but still have some questions.  The shop I'm 
considering for the sandblasting can also spray on a zinc layer 
afterwards using an arc pistol fed with zinc wire.  It melts the zinc 
wire, atomizes it, and then sprays it onto the surface.  Is this good, 
bad, indifferent, compared to other methods?

Jon




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************