[PSUBS-MAILIST] Alan's thrusters

[glen brown via Personal_Submersibles]

Hi Alan
Well done with the ruga.Are you still planning on using that H King turnigy
sk3 bldc and if so have you done any test with that prop yet.Been flying
Heli's catching game for the last couple of months tense work,any case good
to be on the ground and able to tinker on my sub again for summer.
Glen

On Mon, Nov 2, 2015 at 4:04 AM, Alan James via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi Hank,
> I am waiting for an adapter plate from China so I can put a larger
> chuck on my lathe that will hold 100mm round aluminium bar.
> Then I can machine the housing.
> Have replaced the motors central shaft with a longer 316 ss shaft
> & mounted a propeller on it. Have it sitting in a vice on my kitchen
> table & am having fun powering it up.
> Am also making up a stronger jig to mount it on for in pool testing
> of thrust & amp draw under load.
> Cheers Alan
>
>
> ------------------------------
> *From:* hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Sent:* Monday, November 2, 2015 2:39 PM
> *Subject:* [PSUBS-MAILIST] Alan's thrusters
>
> Alan,
> How is your machining project going, got any pictures?
> Hank
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151102/70a36b5c/attachment.html>