[PSUBS-MAILIST] External K250 stiffeners?

[Steve McQueen via Personal_Submersibles]

I would definitely put the stiffening rings on the outside if I was building from scratch.  I am trying to maximize the interior space of my K-250 as I build out the internals and if I could change that it would be significant.

Thanks,
Steve

---- irox via Personal_Submersibles <personal_submersibles at psubs.org> wrote: 
> Hi
> 
> keeping the K250 stiffen questions momentum going.
> 
> I'm restore-modding a early K250 (more like the last of VAST MK3s sold as a K250 after VAST and Kittredge parted ways).  One change I'm considering fitting external stiffeners to replace the internal stiffing/ballast tank structure.
> 
> Also, if I was building from scratch I would be making the same consideration.
> 
> Anybody else thinking about this or have thoughts about this?
> 
> Thanks,
>   Ian.
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles