Re: [PSUBS-MAILIST] concept sketch

["GEORGE SLATERPRYCE" <gslaterp@hotmail.com>]

The foreword chamber on the starboard side, this would be the lockout 
chamber? Why would you have an observational blister to the outside there?

Great modeling, what did you use to model?


GEORGE SLATERPRYCE
----- Original Message ----- 
From: "Sean T. Stevenson" <cast55@telus.net>
To: <personal_submersibles@psubs.org>
Sent: Wednesday, February 22, 2006 8:51 PM
Subject: [PSUBS-MAILIST] concept sketch


> I just uploaded a sketch of my submarine concept to my website, if anyone 
> cares to take a look.  The basic idea behind this one is that it is a large 
> sub (not really psub material, unless you have really deep pockets) - large 
> enough to operate without a large surface support ship for launch and 
> recovery - hopefully reducing operating cost, but still small enough that 
> it can be moored anywhere that can accomodate large yachts or commercial 
> fishing vessels.  A novel feature are the dual forward viewing bubbles 
> which are oriented in sight of each other - allowing divers in the chamber 
> to communicate visually with crew in the other compartment.  This design 
> takes a good chunk out of the bow profile, wreaking havoc with 
> streamlining; however, by changing the formerly elliptical bow lines to a 
> circular profile, as the drawing shows, it becomes possible to have a 
> shield that rotates into position from either side to protect the windows 
> and correct the hull profile for high speed cruising.  Thoughts?
>
> The site address is www.seanstevenson.ca
>
> -Sean
>
>
>
>
>
> ************************************************************************
> ************************************************************************
> ************************************************************************
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003.  Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
>
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> removeme-personal_submersibles@psubs.org
>
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of
> our server receiving your request.
>
> PSUBS.ORG
> PO Box 311
> Weare, NH  03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************



************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************