Re: [PSUBS-MAILIST] Need a machine part?

["" <psub101@iquest.net>]

Jim,
A company that has made the acrylic domes for several submersibles is Reynolds 
Polymer Technology. Their Web site is located at: www.reynoldspolymer.com
I have had not personal contact with them but I am sure they would understand 
your application.

Steve McQueen,
Indianapolis

Quoting James Kocourek <kocpnt@lakefield.net>:

> Cliff, Thanks for the input on LABoiler, I will check them out. Also does
> anyone know of a source for cast acrylic domes 2 - 3 inches thick.
> 
> Thanks,
> 
> Jim Kocourek 
>   ----- Original Message ----- 
>   From: Cliff Redus 
>   To: personal_submersibles@psubs.org 
>   Sent: Thursday, May 04, 2006 10:01 AM
>   Subject: Re: [PSUBS-MAILIST] Need a machine part?
> 
> 
>   I purchased my heads from LA Boiler Works  http://www.laboiler.com.  My
> heads were semi elliptical but I am sure they carry hemispherical as well. 
> 
>   Cliff
>     ----- Original Message ----- 
>     From: James Kocourek 
>     To: personal_submersibles@psubs.org 
>     Sent: Thursday, May 04, 2006 6:47 AM
>     Subject: Re: [PSUBS-MAILIST] Need a machine part?
> 
> 
>     Can anyone give me an idea about a good US source for hemispherical
> heads. I have a quote for 5/8 steel by 48 inch diameter at $2,600.00. I don't
> know enough to know if this is a good price or not. Maybe someone has another
> source I can check.
> 
>     Thanks,
> 
>     Jim Kocourek 
>       ----- Original Message ----- 
>       From: Shawn H. 
>       To: personal_submersibles@psubs.org 
>       Sent: Thursday, May 04, 2006 12:21 AM
>       Subject: Re: [PSUBS-MAILIST] Need a machine part?
> 
> 
>       Actual link is:
>       http://www.emachineshop.com/
> 
>       They've been around a while and have basically the best online
> machine-shop service in the world from what I've seen.  Very useful.  I've
> never used em as I have no projects goin at this time, but I plan on it for
> sure if I have the money to burn.
>         ----- Original Message ----- 
>         From: SFreihof@aol.com 
>         To: personal_submersibles@psubs.org 
>         Sent: Wednesday, May 03, 2006 9:09 PM
>         Subject: [PSUBS-MAILIST] Need a machine part?
> 
> 
>         Here's a link I thought someone here may find of use, or at least of
> interest.  I can't vouch for them, and I know nothing about them, but it
> sounds like they could be useful...
> 
>         http://peswiki.com/index.php/Tools:eMachineShop
> 
>         Stan





************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************