[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] New Guy

To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] New Guy
From: "Paul Kreemer" <paulkreemer@gmail.com>
Date: Wed, 5 Jul 2006 10:43:20 -0700
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=mmKFZXiBAImgnqple9OODsM0jSBcTZGPFloMascl1cyRF/Rv67OMoR18hYwYr2mkTIxo9Hab7+VKHqppkJsBI2db0Tbpk6cTh3HaqYu2IwA9reeJp3K2xuc40tM2HA0Ch3gdEi1tvIfnBvMjEapDrSnpLacc0ovwIChzI3+YDBs=
In-reply-to: <542.2147f3d.31dae9a1@aol.com>
References: <542.2147f3d.31dae9a1@aol.com>
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Frank, that sounds like a very practical method - do it like the pros with a surface support ship.

Have you done the math on a 96" diameter, 3/8" hull? I imagine it needs a fair amount of framing.

Paul

One concern I've had is the slow speed of most subs on the surface, and I'm working on an idea to attach the sub to it's own tender craft with air and power on-board plus an engine to drive both to the dive site at a reasonable speed.

Once on-site, the two will separate but stay tethered together while the submersible section dives.

References:
- Re: [PSUBS-MAILIST] New Guy
  - From: ShellyDalg@aol.com

Prev by Date: RE: [PSUBS-MAILIST] vendors/services
Next by Date: Re: [PSUBS-MAILIST] New Guy
Previous by thread: Re: [PSUBS-MAILIST] New Guy
Next by thread: Re: [PSUBS-MAILIST] New Guy - sub tender
Index(es):
- Date
- Thread