Re: [PSUBS-MAILIST] Papenberg Depth Gauge #3

["Jens Laland" <laland@artematrix.org>]

Michael

I looked through some junk today to see it's really possible to make a
metal-to-glass coupling without using a lathe, and this is what I came up
with, ref:

ftp://ftp.artematrix.org/instrumentation/papenberg_and_trimmzeiger/homemade/water-tap_a.jpg

ftp://ftp.artematrix.org/instrumentation/papenberg_and_trimmzeiger/homemade/water-tap_b.jpg

ftp://ftp.artematrix.org/instrumentation/papenberg_and_trimmzeiger/homemade/metal-to-glass_old-part_a.jpg

ftp://ftp.artematrix.org/instrumentation/papenberg_and_trimmzeiger/homemade/metal-to-glass_old-part_b.jpg

ftp://ftp.artematrix.org/instrumentation/papenberg_and_trimmzeiger/homemade/metal-to-glass_old-part.jpg

Next time I'll go through the overall principle of the Papenberg gauge.

Best regards,
Jens Laland




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************