Re: [PSUBS-MAILIST] Rudder angle indicators

["Jens Laland" <laland@artematrix.org>]

Alan

Here is a little test I did using a 10kOhm potentiometer (to simulate your
rudder position pot) connected to a very simple circuit, built around two
cascaded LM3914 Dot/Bar Display Drivers; ref

http://www.youtube.com/watch?v=Df5DEqrguyM

[My first attempt (the non-linear part), using an LM339 Quad Voltage
Comparator, would better lend itself to other uses like showing the
available battery capacity, etc.]

Best regards,
Jens Laland





************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************